“…parts and accessories which are suitable for use solely or principally with articles of this chapter are to be classified with those articles.”
“5. The FTT described BAB’s business in paragraph [8] of the FTT Decision as follows: “BAB offers an experience whereby, at BAB’s “workshops” or online, customers can choose a “skin” to create their own stuffed toy or doll in the form of an animal, including bears, or a human (“BAB stuffed animals” and “BAB stuffed dolls and together “BAB stuffed toys”). At the workshop children participate in stuffing the skin, with the assistance from a store associate, before it is stitched into the finished BAB stuffed toy by a store associate. As set out below, a textile heart is always inserted into the skin before it is finally stitched together to form the finished product. BAB also sell a range of other toys and dolls as set out below. The items are included within the extensive range of clothing and other “accessories” which BAB also sells which can be used with BAB stuffed toys and other toys BAB sells. Customers can purchase the items separately without the need to purchase a toy.” 6. The Build-A-Bear group’s business was traditionally focussed on toys in the form of animals, including bears. In 2009, the Build-A-Bear group introduced a “Sweetheart” range of stuffed dolls in human form, branded as “Honey” and “Daisy”
“6. The Common Customs Tariff came into existence in 1968. By Article 28 of the revised EC Treaty Common Customs Tariff duties are fixed by the Council acting on a qualified majority on a proposal from the Commission. 7. The level of customs duties on goods imported from outside the EC is determined at Community level on the basis of the Combined Nomenclature (“CN”) established by art 1 of Council Regulation 2658/1987. The CN is established on the basis of the World Customs Organisation’s Harmonised System laid down in the International Convention on the Harmonised Commodity Description and Coding System 1983 to which the Community is a party. 8. Article 3(1)(a)(ii) of the International Convention provides that, subject to certain exceptions, each contracting party undertakes “to apply the General Rules for the interpretation of the Harmonised System and all the Section, Chapter and Subheading Notes and shall not modify the scope of the Section, Chapters or subheading of the Harmonised System”
“(I) This rule provides three methods of classifying goods which, prima facie, fall under two or more headings, either under the terms of Rule 2(b) or for any other reason. These methods operate in the order in which they are set out in the Rule. Thus Rule 3(b) operates only if Rule 3(a) fails in classification, and if both Rules 3(a) and (b) fail, Rule 3(c) will apply. The order of priority is therefore (a) specific description; (b) essential character; (c) heading which occurs last in numerical order.”
“(II) For the purposes of Rule 6, the following expressions have the meanings hereby assigned to them: … “(b) “unless the context otherwise requires”: except where Section or Chapter Notes are incompatible with subheading texts or Subheading Notes. This occurs, for example, in Chapter 71 where the scope assigned to the term “platinum” in Chapter Note 4(B) differs from that assigned to “platinum” in Subheading Note 2. For the purpose of interpreting subheadings 7110.11 and 7110.19, therefore, Subheading Note 2 applies and Chapter Note 4(B) is to be disregarded.”
“16. For present purposes, suffice to say that: (1) The GIRs provide a set of rules for interpretation of the CN in order to ensure that all products are classified under the correct code and (unlike the HSENs and CNENs) all have “the force of law” (Vtech [16]). (2) It is common ground that, in the interests of legal certainty and ease of verification, the decisive criteria for the tariff classification of goods must be sought in their objective characteristics and properties as defined by the wording of the relevant heading of the CN and of the notes to the sections or chapters of the CN (Holz Geenen GmbH v Oberfinanzdirektion Munchen (Case C-309/98 ) at [14]). (3) The intended use of the goods may be considered as part of the classification analysis where that use is inherent to the goods and that inherent character is capable of being assessed by reference to the objective characteristics and properties of the goods (see Hauptzollant Hamburg-St. Annen v Thyssen Haniel Logistic GmbH (Case C-459/93 ) (“Thyssen Haniel”) at [13]). (4) Having regard to the objective characteristics and properties of the goods, a combined examination of the wording of the headings and the explanatory notes to the relevant sections and chapters should be undertaken to determine whether a definitive classification can be reached, in accordance with GIR 1 and GIR 6. If not, then in order to resolve the conflict between the competing provisions, recourse must be had to GIRs 2-5 (see the opinion of Advocate General Kokott in Uroplasty v Inspector van de Belastingdienst (Case C-514/04 ) (“Uroplasty”) at [42]. (5) GIR 3 will apply only when it is apparent that goods are prima facie classifiable under a number of headings (see Kip Europe SA & Ors and Hewlett Packard International SARL v Administration de douanes (Cases C-362/07-C363/07) (“Kip Europe”) at [39] and the wording of GIR 3 itself). (6) Classification must proceed on a strictly hierarchical basis, taking each level of the CN in turn. The wording of headings and subheadings can be compared only with the wording of headings and subheadings at the same level (see the opinion of Advocate General Kokott, Uroplasty [43]). (7) The HSENs and the CNENs are an important aid to the interpretation of the scope of the various tariff headings but do not themselves have legally binding force. The content of the HSENs and the CNENs must therefore be compatible with the provisions of the CN, and cannot alter the meaning of those provisions (see Revenue and Customs Commissioners v Honeywell Analytics Limited[2018] EWCA Civ 579 per Davis LJ (“Honeywell Analytics”) at [95] and Invamed per Patten LJ at [12]).” (1) The GIRs provide a set of rules for interpretation of the CN in order to ensure that all products are classified under the correct code and (unlike the HSENs and CNENs) all have “the force of law” (Vtech [16]). (2) It is common ground that, in the interests of legal certainty and ease of verification, the decisive criteria for the tariff classification of goods must be sought in their objective characteristics and properties as defined by the wording of the relevant heading of the CN and of the notes to the sections or chapters of the CN (Holz Geenen GmbH v Oberfinanzdirektion Munchen (Case C-309/98 ) at [14]). (3) The intended use of the goods may be considered as part of the classification analysis where that use is inherent to the goods and that inherent character is capable of being assessed by reference to the objective characteristics and properties of the goods (see Hauptzollant Hamburg-St. Annen v Thyssen Haniel Logistic GmbH (Case C-459/93 ) (“Thyssen Haniel”) at [13]). (4) Having regard to the objective characteristics and properties of the goods, a combined examination of the wording of the headings and the explanatory notes to the relevant sections and chapters should be undertaken to determine whether a definitive classification can be reached, in accordance with GIR 1 and GIR 6. If not, then in order to resolve the conflict between the competing provisions, recourse must be had to GIRs 2-5 (see the opinion of Advocate General Kokott in Uroplasty v Inspector van de Belastingdienst (Case C-514/04 ) (“Uroplasty”) at [42]. (5) GIR 3 will apply only when it is apparent that goods are prima facie classifiable under a number of headings (see Kip Europe SA & Ors and Hewlett Packard International SARL v Administration de douanes (Cases C-362/07-C363/07) (“Kip Europe”) at [39] and the wording of GIR 3 itself). (6) Classification must proceed on a strictly hierarchical basis, taking each level of the CN in turn. The wording of headings and subheadings can be compared only with the wording of headings and subheadings at the same level (see the opinion of Advocate General Kokott, Uroplasty [43]). (7) The HSENs and the CNENs are an important aid to the interpretation of the scope of the various tariff headings but do not themselves have legally binding force. The content of the HSENs and the CNENs must therefore be compatible with the provisions of the CN, and cannot alter the meaning of those provisions (see Revenue and Customs Commissioners v Honeywell Analytics Limited[2018] EWCA Civ 579 per Davis LJ (“Honeywell Analytics”) at [95] and Invamed per Patten LJ at [12]).”
“This heading also covers identifiable parts and accessories of the articles of this heading, which are suitable for use solely or principally therewith and provided they are not articles excluded by Note 1 to this Chapter.”
“whilst the clothing items can plainly be used on any toy or doll of an appropriate size, the fact is that they are, according to their objective design characteristics, suitable principally for use with stuffed toys.”
“The size and rounded shape of the footwear, as designed specifically to fit BAB’s stuffed bears, clearly indicates that the footwear is suitable for use principally, in the sense of for the most part or chiefly, with stuffed bears.”
“177. … it is likely that [Note 3] is intended to apply to the reference to “parts and accessories thereof” in the Dolls Subheading. If that was not the intention the wording of note 3 could have been modified accordingly. Moreover, it would be very odd if “parts and accessories” are to be classified with articles in headings in chapter 95 (a) which do not specifically mention “parts and accessories” only if they are suitable for use solely or principally with those articles but (b) which specifically mention “parts and accessories” by reference to some lesser test. I also think it likely that, in any event, the terms “parts and accessories thereof” in the [Dolls Subheading] is to be interpreted as meaning that an item must be mainly or principally intended for or suitable for use with human dolls for it to be an accessory of such a doll.”
“105. We are not convinced by HMRC’s submissions on this issue. GIR 1 and GIR 6 require classification to be undertaken by reference to the terms of the headings and subheadings and the relative section notes and chapter notes, unless the context otherwise requires. That must mean that classification is to be undertaken by reference to the wording of the headings and subheadings. For this reason, we do not find attractive an interpretation which requires us to ignore the wording of the Dolls Subheading (or to regard it as being of no significance) as HMRC invite us to do. We start from the premise that, when engaging in an exercise of classification for the purpose of the CN, we must seek to give effect to the wording of the Dolls Subheading, which, in simply referring to “parts and accessories” without more, is different from Note 3.”
“108. In the present case, it is accepted by the parties that the clothing items and wigs fall within heading 9503. HMRC say that this is because Note 3 applies to bring them within the heading. But, even without Note 3, in our view, the clothing items and wigs would fall within heading 9503; the HSENs in two separate places – first under the heading “General” in the notes to Chapter 95 and second under the heading “Parts and Accessories” – support the view that the headings in the chapter (including heading 9503) extend to parts and accessories which are suitable for use solely or principally with articles within the heading. At that level, the clothing items and wigs would fall within heading 9503 on the basis that the clothing and wigs are suitable for use solely or principally with articles within the heading, that is dolls and/or toys, both of which are referred to in the heading. They would not fall out of the heading, even applying the interpretation of “principally” to which we have referred to above, if they were suitable for use both with dolls and with toys but it was not possible to determine which was the predominant use. The strict hierarchical process would then require that we move on to classify all of the items that have fallen within that heading within a relevant subheading of heading 9503.”
“42. First, the intended use and material composition of the article must be precisely determined. Next, in the light of the wording of the headings of the relevant sections and chapters a provisional classification must be undertaken to the article’s intended use and material composition. There must then be considered whether on a combined examination of the wording of the headings and the explanatory notes to the relevant sections and chapters a definitive classification may be reached. If not, then in order to resolve the conflict between the competing provisions recourse must be had to Rules 2 to 5 of the general rules. Lastly, classification must be made under the subheadings. 43. Classification must proceed on a strictly hierarchical basis taking each level of the CN in turn. The wording of one heading can be compared only with the wording of another heading; the wording of a first subheading can be compared only with the wording of other first subheadings of the same heading; and the wording of a second subheading can be compared only with the wording of other second subheadings of the same first subheading.”