“18. … The object of any refrigerator is to maintain the internal temperature (and thus that of the goods stored in it) at the desired level by absorbing heat from within the cabinet and expelling it outside the cabinet by means of a condenser. Integral cabinets achieve this using refrigeration equipment and condensers installed within the body of the cabinet itself, and by expelling heat to the environment immediately surrounding the cabinet. Remote cabinets, in contrast, employ refrigeration equipment at a distance from the cabinets; heat is absorbed by a liquid refrigerant which is conveyed to the cabinet through pipes permanently installed in the store and is expelled remotely through condensers located outside the building. … 20. As integral cabinets are designed to operate below a particular ambient temperature (25ºC in the case of Iceland’s … cabinets) the heat generated by the cabinets themselves must be controlled to ensure that they perform as intended and do not malfunction. Where a large number of integral cabinets is present in a confined space, it is necessary to provide an air handling system with a correspondingly large cooling capacity. If the design parameters of the cabinets are exceeded the permitted product storage temperature within the cabinets may be breached causing a deterioration in the quality of the products stored or displayed in them.”
“12. The air handling system provides a ventilating, heating and cooling service to the appeal property, and comprises three main elements. A large air handling unit with a mechanical cooling capacity of approximately 85 kW is located outside and to the rear of the building; this unit serves a network of ducts by which warm or cold air is supplied to and extracted from the retail area through an array of ceiling mounted diffusers and grilles. On our inspection we were able to observe the air handling unit and to contrast it with the very much smaller units on the rear walls of adjoining stores - one of which is considerably larger than the [premises]. Iceland’s equipment occupies its own fenced compound and in size and shape resembles a very large refuse skip (4.5 metres by 2.35 metres in area) from which rise two vertical supply and return air ducts, each a metre square, which enter the rear wall of the building 4 metres above the ground. A separate but linked mechanical extract system is located at the rear of the retail area, furthest from the entrance, to deal with the removal of excess heat in that area. Finally, the whole system is controlled by means of a computerised control unit located adjacent to the air handling unit. …”
“2. For the purpose of determining the rateable value of a hereditament for any day on or after1 April 2000 , in applying the provisions of sub-paragraphs (1) to (7) of paragraph 2 of Schedule 6 to theLocal Government Finance Act 1988 - (a) in relation to a hereditament in or on which there is plant or machinery which belongs to any of the classes set out in the Schedule to these Regulations, the prescribed assumptions are that: (i) any such plant or machinery is part of the hereditament; and (ii) the value of any other plant and machinery has no effect on the rent to be estimated as required by paragraph 2(1); and (b) in relation to any other hereditament, the prescribed assumption is that the value of any plant or machinery has no effect on the rent to be so estimated.”
“Plant and machinery specified in Table 2 below … which is used or intended to be used in connection with services to the hereditament or part of it, other than any such plant or machinery which is in or on the hereditament and is used or intended to be used in connection with services mainly or exclusively as part of manufacturing operations or trade processes.”
“When one turns to the Third Schedule of the Act, it is apparent that it enumerates that type of machinery and plant which is conveniently described in the case as motive machinery; it is the machinery without which the mill could not begin to work, as, for example, the generation of power, heating and cooling, lifts and elevators, railways, tramlines and tracks, and other things, the foundation of that which was to become the work of the mill. When the machinery and plant referred to in the Third Schedule are eliminated, what is left is the kind of machinery which is concisely described in this case as process plant and machinery, operative plant and machinery, working and manufacturing plant and machinery. By section 24(1)(b), no account is to be taken of the value of any plant or machinery of that kind …”
“where, for instance, a man is polishing at a buff, and there is a fan drawing off the dust so that it shall not go down his throat, that is to be treated as part of the machinery, and not as part of the heating or ventilating plant which is run.”
“8.8 What we have said so far relates to plant and machinery which is used for the purpose of a trade or industrial process. There is also the problem of plant and machinery which is introduced for the purpose of providing services for the premises, or which forms part of its infrastructure. This type of equipment has never given rise to any difficulty as a matter of principle. In the letting market landlords typically provide the services and infrastructure, and it has been taken for granted that such items should always be deemed to form part of the hereditament, even in the case of property which is not normally found in that market. 8.9 The difficulty arises in the practical application of the principle, again as our predecessors have found, because it is extremely unusual, in the case of large-scale industrial property, to find plant and machinery which is installed exclusively for the purpose of providing general services, such as light, heat and ventilation, and is not also closely bound up with the trade process. In the existing regulations in each of the countries of the United Kingdom it has therefore proved necessary to draw some fairly arbitrary line in order to indicate the point up to which such plant and equipment can fairly be rated, by analogy with commercial hereditaments generally, and beyond which rateability should cease, because at that stage it is impossible in practical terms to disentangle the service from the process function. We have looked at the boundaries which have been drawn in the past, and have redrawn them in order to simplify the task of valuers, assessors and agents and to reflect some of the technical changes which have taken place in industry since they were last reviewed.”
“Rateability should continue, in our opinion, to be determined in accordance with the following rules: (1) that the land and everything which forms part of it and is attached to it should be assessed; (2) that process plant and machinery which can fairly be described as ‘tools of the trade’ should be exempt within certain limits; (3) that process plant or machinery (in certain cases exceeding a stated size) which is or is in the nature of a building or structure or performs the function of a building or structure should, however, be deemed to be part of the hereditament or subject; (4) that service plant and machinery, and items forming part of the infrastructure of the property should be rated; and (5) that, in the case of plant and machinery which performs both a service and a process function sensible lines have to be drawn which will indicate exactly how much falls to be rated and how much does not.”
“But many services in non-domestic property, which might be found whatever the use of the property, are also used incidentally for manufacturing operations in some instances.”
“9.14 We have considered whether the current definition should be amended or dropped altogether. For example, we discussed whether it might be preferable to exclude from rateability only that service plant which ‘solely’ supports a process function. However to treat plant as process plant only if it was wholly for process purposes would increase the rateability of this type of plant and machinery. Such plant is rarely met in practice. As an alternative, we considered whether it would be possible to apportion the value of the plant between Classes 1B and 4 reflecting the relative use for service and process activity. But this would run contrary to our desire for cost-effectiveness of valuation effort and could create new opportunities for dispute. 9.15 We therefore conclude that notwithstanding the difficulties which have been encountered in deciding the degree to which plant is used for process purposes the law as we understand it in both England and Scotland should remain unaltered but that the draftsmanship should be improved to eliminate the difficulties inherent in the English Regulations.”
“66. All retail warehouses require heating, cooling and ventilation to a greater or lesser extent. We do not consider that the plant and machinery installed to provide those services can properly be regarded as being used or intended to be used as part of manufacturing operations or trade processes. We appreciate that the scale of Iceland’s particular air handling system is dictated by the presence in its store of substantial numbers of integral cabinets, each of which creates heat, and which collectively are essential to Iceland’s preferred style of trading. A serious malfunction of the air handling system would therefore put its stock at risk. That feature distinguishes Iceland’s air handling needs from those of other retailers, but we do not regard that difference as critical. Although the particular needs of Iceland create a greater need for those services than the norm, we do not agree that they make its air handling system an exception to the general rule that such plant and machinery is to be assumed to be part of the hereditament and therefore to be rateable.”
“Even if it were to be found that this could only be done by the protection of the building and therefore that that was the main use of the equipment, it would nevertheless not be included within the schedule because it was there expressly for the purpose of the trade process being carried on.”
“(3) Subjection to a process means a treatment (or course of operations) involving the application of a method of manufacture or adaptation of goods or materials towards a particular use, purpose or end …”